Adapting Android Studios Sample BluetoothLeGatt code to display a checkable list rather than a listview

Please forgive any oversight as I am relatively new to learning Android. I am currently using Android Studio's BluetoothLeGatt sample code to find embedded devices that advertise a particular UUID. However, I am struggling to build the interface in which my device would display the embedded devices in a listview that offers the user the ability to check or select the ones they desire. After looking at their Custom Choice List sample code it appears that they are utilizing the public int[] onCreateDrawableState(Int extraSpace) method to draw the checked states over the listview (See the first block of code). But I am not sure how to implement this within the BluetoothLeGatt so that the listview still represents the devices found by the bluetooth adapters and is checkable.

public int[] onCreateDrawableState(int extraSpace) {
        final int[] drawableState = super.onCreateDrawableState(extraSpace + 1);
        if (isChecked()) {
            mergeDrawableStates(drawableState, CHECKED_STATE_SET);
        }
        return drawableState;
    }

According to this link, it appears that if I were using a linear layout that I would be able to implement the checkable interface and work from there. However, my application instead relies on a ListActivity. Am I able to implement a checked list while implementing my code this way?

I believe the block of code below from DeviceScanActivity in BluetoothBleGatt in Android Studio contains the area where I would make my list view checkable but I'm not sure how to do so.

@Override
        public View getView(int i, View view, ViewGroup viewGroup) {
            ViewHolder viewHolder;
            // General ListView optimization code.
            if (view == null) {
                view = mInflator.inflate(R.layout.listitem_device, null);
                viewHolder = new ViewHolder();
                viewHolder.deviceAddress = (TextView) view.findViewById(R.id.device_address);
                viewHolder.deviceName = (TextView) view.findViewById(R.id.device_name);
                view.setTag(viewHolder);
            } else {
                viewHolder = (ViewHolder) view.getTag();
            }

            BluetoothDevice device = mLeDevices.get(i);
            final String deviceName = device.getName();
            if (deviceName != null && deviceName.length() > 0)
                viewHolder.deviceName.setText(deviceName);
            else
                viewHolder.deviceName.setText(R.string.unknown_device);
            viewHolder.deviceAddress.setText(device.getAddress());

            return view;
        }

DeviceScanActivity.java from BluetoothBleGatt

import android.app.Activity;
import android.app.ListActivity;
import android.bluetooth.BluetoothAdapter;
import android.bluetooth.BluetoothDevice;
import android.bluetooth.BluetoothManager;
import android.content.Context;
import android.content.Intent;
import android.content.pm.PackageManager;
import android.os.Bundle;
import android.os.Handler;
import android.view.LayoutInflater;
import android.view.Menu;
import android.view.MenuItem;
import android.view.View;
import android.view.ViewGroup;
import android.widget.BaseAdapter;
import android.widget.ListView;
import android.widget.TextView;
import android.widget.Toast;

import java.util.ArrayList;

/**
 * Activity for scanning and displaying available Bluetooth LE devices.
 */
public class DeviceScanActivity extends ListActivity {
    private LeDeviceListAdapter mLeDeviceListAdapter;
    private BluetoothAdapter mBluetoothAdapter;
    private boolean mScanning;
    private Handler mHandler;

    private static final int REQUEST_ENABLE_BT = 1;
    // Stops scanning after 10 seconds.
    private static final long SCAN_PERIOD = 10000;

    @Override
    public void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        getActionBar().setTitle(R.string.title_devices);
        mHandler = new Handler();

        // Use this check to determine whether BLE is supported on the device.  Then you can
        // selectively disable BLE-related features.
        if (!getPackageManager().hasSystemFeature(PackageManager.FEATURE_BLUETOOTH_LE)) {
            Toast.makeText(this, R.string.ble_not_supported, Toast.LENGTH_SHORT).show();
            finish();
        }

        // Initializes a Bluetooth adapter.  For API level 18 and above, get a reference to
        // BluetoothAdapter through BluetoothManager.
        final BluetoothManager bluetoothManager =
                (BluetoothManager) getSystemService(Context.BLUETOOTH_SERVICE);
        mBluetoothAdapter = bluetoothManager.getAdapter();

        // Checks if Bluetooth is supported on the device.
        if (mBluetoothAdapter == null) {
            Toast.makeText(this, R.string.error_bluetooth_not_supported, Toast.LENGTH_SHORT).show();
            finish();
            return;
        }
    }

    @Override
    public boolean onCreateOptionsMenu(Menu menu) {
        getMenuInflater().inflate(R.menu.main, menu);
        if (!mScanning) {
            menu.findItem(R.id.menu_stop).setVisible(false);
            menu.findItem(R.id.menu_scan).setVisible(true);
            menu.findItem(R.id.menu_refresh).setActionView(null);
        } else {
            menu.findItem(R.id.menu_stop).setVisible(true);
            menu.findItem(R.id.menu_scan).setVisible(false);
            menu.findItem(R.id.menu_refresh).setActionView(
                    R.layout.actionbar_indeterminate_progress);
        }
        return true;
    }

    @Override
    public boolean onOptionsItemSelected(MenuItem item) {
        switch (item.getItemId()) {
            case R.id.menu_scan:
                mLeDeviceListAdapter.clear();
                scanLeDevice(true);
                break;
            case R.id.menu_stop:
                scanLeDevice(false);
                break;
        }
        return true;
    }

    @Override
    protected void onResume() {
        super.onResume();

        // Ensures Bluetooth is enabled on the device.  If Bluetooth is not currently enabled,
        // fire an intent to display a dialog asking the user to grant permission to enable it.
        if (!mBluetoothAdapter.isEnabled()) {
            if (!mBluetoothAdapter.isEnabled()) {
                Intent enableBtIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE);
                startActivityForResult(enableBtIntent, REQUEST_ENABLE_BT);
            }
        }

        // Initializes list view adapter.
        mLeDeviceListAdapter = new LeDeviceListAdapter();
        setListAdapter(mLeDeviceListAdapter);
        scanLeDevice(true);
    }

    @Override
    protected void onActivityResult(int requestCode, int resultCode, Intent data) {
        // User chose not to enable Bluetooth.
        if (requestCode == REQUEST_ENABLE_BT && resultCode == Activity.RESULT_CANCELED) {
            finish();
            return;
        }
        super.onActivityResult(requestCode, resultCode, data);
    }

    @Override
    protected void onPause() {
        super.onPause();
        scanLeDevice(false);
        mLeDeviceListAdapter.clear();
    }

    @Override
    protected void onListItemClick(ListView l, View v, int position, long id) {
        final BluetoothDevice device = mLeDeviceListAdapter.getDevice(position);
        if (device == null) return;
        final Intent intent = new Intent(this, DeviceControlActivity.class);
        intent.putExtra(DeviceControlActivity.EXTRAS_DEVICE_NAME, device.getName());
        intent.putExtra(DeviceControlActivity.EXTRAS_DEVICE_ADDRESS, device.getAddress());
        if (mScanning) {
            mBluetoothAdapter.stopLeScan(mLeScanCallback);
            mScanning = false;
        }
        startActivity(intent);
    }

    private void scanLeDevice(final boolean enable) {
        if (enable) {
            // Stops scanning after a pre-defined scan period.
            mHandler.postDelayed(new Runnable() {
                @Override
                public void run() {
                    mScanning = false;
                    mBluetoothAdapter.stopLeScan(mLeScanCallback);
                    invalidateOptionsMenu();
                }
            }, SCAN_PERIOD);

            mScanning = true;
            mBluetoothAdapter.startLeScan(mLeScanCallback);
        } else {
            mScanning = false;
            mBluetoothAdapter.stopLeScan(mLeScanCallback);
        }
        invalidateOptionsMenu();
    }

    // Adapter for holding devices found through scanning.
    private class LeDeviceListAdapter extends BaseAdapter {
        private ArrayList<BluetoothDevice> mLeDevices;
        private LayoutInflater mInflator;

        public LeDeviceListAdapter() {
            super();
            mLeDevices = new ArrayList<BluetoothDevice>();
            mInflator = DeviceScanActivity.this.getLayoutInflater();
        }

        public void addDevice(BluetoothDevice device) {
            if(!mLeDevices.contains(device)) {
                mLeDevices.add(device);
            }
        }

        public BluetoothDevice getDevice(int position) {
            return mLeDevices.get(position);
        }

        public void clear() {
            mLeDevices.clear();
        }

        @Override
        public int getCount() {
            return mLeDevices.size();
        }

        @Override
        public Object getItem(int i) {
            return mLeDevices.get(i);
        }

        @Override
        public long getItemId(int i) {
            return i;
        }

        @Override
        public View getView(int i, View view, ViewGroup viewGroup) {
            ViewHolder viewHolder;
            // General ListView optimization code.
            if (view == null) {
                view = mInflator.inflate(R.layout.listitem_device, null);
                viewHolder = new ViewHolder();
                viewHolder.deviceAddress = (TextView) view.findViewById(R.id.device_address);
                viewHolder.deviceName = (TextView) view.findViewById(R.id.device_name);
                view.setTag(viewHolder);
            } else {
                viewHolder = (ViewHolder) view.getTag();
            }

            BluetoothDevice device = mLeDevices.get(i);
            final String deviceName = device.getName();
            if (deviceName != null && deviceName.length() > 0)
                viewHolder.deviceName.setText(deviceName);
            else
                viewHolder.deviceName.setText(R.string.unknown_device);
            viewHolder.deviceAddress.setText(device.getAddress());

            return view;
        }
    }

    // Device scan callback.
    private BluetoothAdapter.LeScanCallback mLeScanCallback =
            new BluetoothAdapter.LeScanCallback() {

        @Override
        public void onLeScan(final BluetoothDevice device, int rssi, byte[] scanRecord) {
            runOnUiThread(new Runnable() {
                @Override
                public void run() {
                    mLeDeviceListAdapter.addDevice(device);
                    mLeDeviceListAdapter.notifyDataSetChanged();
                }
            });
        }
    };

    static class ViewHolder {
        TextView deviceName;
        TextView deviceAddress;
    }
}

The Additional code can be found on Android Studio's sample program BluetoothLeGatt. I would post it but I don't have enough characters.

Thanks in advance!